 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EC31 Series * RoHS Compliant (Pb-free) * Voltage Controlled Crystal Oscillator (VCXO) * 5.0V Supply Voltage * HCMOS/TTL output * 14 pin DIP package * Stability to 20ppm * Wide frequency and pull range ELECTRICAL SPECIFICATIONS Frequency Range (MHz) Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Aging (at 25C) Load Drive Capability Start Up Time Frequency Deviation / Control Voltage EC31 H 5.08 L 20.8 W 13.2 OSCILLATOR 2.5VDC 2.0VDC Positive Transfer Characteristic, 2.5VDC 2.0VDC Positive Transfer Characteristic, 2.5VDC 2.0VDC Positive Transfer Characteristic, 2.5VDC 2.5VDC Positive Transfer Characteristic, or Linearity Input Current 1.000MHz to 20.000MHz 20.001MHz to 30.000MHz 30.001MHz to 155.520MHz Inclusive of Operating Temperature Range, Supply Voltage, and Load w/TTL Load w/HCMOS Load w/TTL Load w/HCMOS Load at 1.4VDC w/TTL Load; at 50% of Waveform w/HCMOS Load at 1.4VDC w/TTL Load and w/HCMOS Load 0.4VDC to 2.4VDC w/TTL Load; 20% to 80% of Waveform w/HCMOS Load Freq. Deviation Options Blank, A or B Freq. Deviation Options C Freq. Deviation Options Blank, A or B Freq. Deviation Options Blank, A or B Freq. Deviation Options C Freq. Deviation options Blank, A or B MANUFACTURER CATEGORY SERIES PACKAGE Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Duty Cycle 1.000MHz to 155.520MHz 0C to 70C or -40C to 85C -55C to 125C 5.0VDC 5% 5ppm / year Maximum 10TTL Load or 15pF HCMOS Load Maximum 10 mSeconds Maximum 50ppm Minimum 100ppm Minimum 150ppm Minimum 200ppm Minimum 20%, 15%, 10% Maximum, or 5% Maximum (not avail. w/200ppm Freq. Dev.) 20mA Maximum 40mA Maximum 50mA Maximum 100ppm, 50ppm, 25ppm, or 20ppm Maximum (0C to 70C only) 2.4VDC Minimum VDD-0.5VDC Minimum 0.4VDC Maximum 0.5VDC Maximum 50 10(%) (Standard) 50 5(%) (Optional) 5 nSeconds Maximum 100pSeconds Max 44.736MHz 100pSeconds Max 30.000MHz 200pSeconds Max >30.000MHz 200pSeconds Max >44.736MHz 25pSeconds Max 44.736MHz 25pSeconds Max 30.000MHz 50pSeconds Max >30.000MHz 50pSeconds Max >44.736MHz VOLTAGE CLASS REV.DATE Rise Time / Fall Time Period Jitter: Absolute Period Jitter: One Sigma ECLIPTEK CORP. OSCILLATOR EC31 14 pin DIP 5.0V OS13 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC31 00 T A 15 ET - 24.000M - G FREQUENCY TOLERANCE / STABILITY 00=100ppm Maximum (Standard) 45=50ppm Maximum, 25=25ppm Maximum 20=20ppm Maximum DUTY CYCLE Blank=50 10(%) (Standard), T=50 5(%) FREQUENCY DEVIATION Blank=50ppm Minimum (Standard) A=100ppm Minimum B=150ppm Minimum, C=200ppm Minimum (2.5VDC 2.5VDC) AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Full Size Gull Wing (See Page 132) FREQUENCY OPERATING TEMP. RANGE Blank=0C to 70C (Standard) ET=-40C to 85C LINEARITY Blank=20% Maximum(Standard) 05=5% Maximum, 10=10% Maximum 15=15% Maximum NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONS Pin 1: Control Voltage (VC) Pin 7: Case Ground Pin 8: Output Pin 14: Supply Voltage Line 1: ECLIPTEK Line 2: EC31 Series Designator ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Seal Integrity Solderability Marking Permanency Shock Vibration Specification Bubble test in Perfluorocarbon at +125C 5C for 60 seconds minimum. Sn63 Solder dip at +230C 5C for 5 seconds/95% coverage. 10 Strokes with brush after 1 minute soak in solvent, 3 times. Random drop on hard wooden plate 3 times from a height of 20cm. Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. CATEGORY SERIES PACKAGE VOLTAGE Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC31 14 pin DIP 5.0V OS13 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. EC31 Series * RoHS Compliant (Pb-free) * Voltage Controlled Crystal Oscillator (VCXO) * 5.0V Supply Voltage * HCMOS/TTL output * 8 pin DIP package * Stability to 20ppm * Wide frequency and pull range NOTES EC31 H 5.6 L 13.2 W 13.2 OSCILLATOR __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range (MHz) Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Aging (at 25C) Load Drive Capability Start Up Time Frequency Deviation / Control Voltage Linearity Input Current 1.000MHz to 20.000MHz 20.0001MHz to 30.000MHz 30.001MHz to 44.736MHz Frequency Tolerance / Stability Inclusive of Operating Temperature Range, Supply Voltage, and Load Output Voltage Logic High (VOH) w/TTL Load w/HCMOS Load Output Voltage Logic Low (VOL) w/TTL Load w/HCMOS Load Duty Cycle at 1.4VDC w/TTL Load; at 50% of Waveform w/HCMOS Load at 1.4VDC w/TTL Load and HCMOS Load Rise Time / Fall Time 0.4VDC to 2.4VDC w/TTL Load; 20% to 80% of Waveform w/HCMOS Load Period Jitter: Absolute Period Jitter: One Sigma 1.000MHz to 44.736MHz 0C to 70C or -40C to 85C -55C to 125C 5.0VDC 5% 5ppm / year Maximum 10TTL Load or 15pF HCMOS Load Maximum 10 mSeconds Maximum 50ppm Minimum 100ppm Minimum 150ppm Minimum 20%, 15%, 10% Maximum, or 5% Maximum 20mA Maximum 40mA Maximum 50mA Maximum 100ppm, 50ppm, 25ppm, or 20ppm Maximum (0C to 70C Only) 2.4VDC Minimum VDD-0.5VDC Minimum 0.4VDC Maximum 0.5VDC Maximum 50 10(%) (Standard) 50 5(%) (Optional) 5 nSeconds Maximum 100pSeconds Maximum 25pSeconds Maximum 2.5VDC 2.0VDC Positive Transfer Characteristic, 2.5VDC 2.0VDC Positive Transfer Characteristic, 2.5VDC 2.0VDC Positive Transfer Characteristic, MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC31 8 pin DIP 5.0V OS18 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC31 00 HS T A 15 ET - 24.000M - G TR FREQUENCY TOLERANCE / STABILITY 00=100ppm Maximum (Standard) 45=50ppm Maximum, 25=25ppm Maximum 20=20ppm Maximum PACKAGE HS=Half Size 8 Pin DIP DUTY CYCLE Blank=50 10(%) (Standard), T=50 5(%) FREQUENCY DEVIATION Blank=50ppm Minimum (Standard) A=100ppm Minimum B=150ppm Minimum PACKAGING OPTIONS Blank=Bulk (Standard) TR=Tape & Reel (only offered with Half Size G and Half Size G2 Options) AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Half Size Gull Wing (See Page 132) G2=Alternate Half Size Gull Wing (See Page 132) FREQUENCY OPERATING TEMP. RANGE Blank=0C to 70C (Standard) ET=-40C to 85C LINEARITY Blank=20% Maximum(Standard) 05=5% Maximum, 10=10% Maximum 15=15%Maximum MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1 Locator for Gull Wing (1) For "G" Option (2) For "G2" Option Pin 1: Control Voltage (Vc) Pin 4: Case Ground Pin 5: Output Pin 8: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: EC31 Series Designator 250 Pieces Per Reel Compliant to EIA-481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Characteristic Seal Integrity Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot Specification Bubble test in Perfluorocarbon at +125C 5C for 60 seconds minimum. Sn63 Solder dip at +230C 5C for 5 seconds/95% coverage. 10 Strokes with brush after 1 minute soak in solvent, 3 times. Random drop on hard wooden plate 3 times from a height of 20cm. Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. Line 4: XX Y ZZ Solderability Marking Permanency Shock Vibration MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC31 8 pin DIP 5.0V OS18 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. |
Price & Availability of EC3100TA15-24000M-CL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |